Plug and Play resistor harness for H10/9005/9006/9012
Plug and Play resistor harness for H10/9005/9006/9012
Stocking item, 30 day return policy applies

Plug and Play resistor harness for H10/9005/9006/9012 (pair)

uLight Electronic
SBX:LR9005
lbs
    Delivery time:Normally ships within 24 hours
Add to cart
  • Description
  • More

Lighting interface parts

Ships by  Small Parcel
LR9005 | Plug and Play resistor harness for H10/9005/9006/9012 (pair), An easy plug and play solution for vehicles with bulb out warnings or headlights turning off due to not enough load.  
Manufactured by uLight Electronic | LR9005 |  Plug and Play resistor harness for H10/9005/9006/9012 (pair),  An easy plug and play solution for vehicles with bulb out warnings or headlights turning off due to not enough load., On some LED or HID installations the headlights will turn off after a few seconds or flash and then turn off. The reason for this is that the vehicle computer did not see enough draw and thinks that the headlight bulb is burned out or not working for other reasons. The solution is to install a resistor in parallel to the LED or HID bulb making the vehicle see enough draw that it will keep the headlight turned on. This is a common issue on some Dodge and Chrysler vehicles This resistor module will also solve Bulb Out warnings   Product information updated on 2024-02-02. This product can ship by Small Parcel