Load resistor, 6 ohm 50 watt, single. Solves light out and fast signal light flashing

SBx Parts
SBX:LED:LR6501
lbs
Add to cart
  • Description
  • More

LED Auxilary Lighting

  | Load resistor, 6 ohm 50 watt, single. Solves light out and fast signal light flashing,  If you have replaced your factory bulbs with LED bulbs and are getting dash warnings or your signal lights flash fast this is an economical way to solve the issue. Simple wire in place between the affected circuit power and ground connection and the vehicle will think that a factory bulb has been installed which will eliminate the warning light or fast flashing  
Manufactured by SBx Parts |   |  Load resistor, 6 ohm 50 watt, single. Solves light out and fast signal light flashing,  If you have replaced your factory bulbs with LED bulbs and are getting dash warnings or your signal lights flash fast this is an economical way to solve the issue. Simple wire in place between the affected circuit power and ground connection and the vehicle will think that a factory bulb has been installed which will eliminate the warning light or fast flashing, One of the advantages of using LED or HID lighting is that they draw less power than incandescent lights. But some vehicles monitor the amount of draw used which can cause an error warning light or other symptoms when the vehicle does not think that there is enough draw. Our Resistors come in a variety of designs to be used in various different circuits to eliminate problems such as signal lights flashing fast, bulb out warnings and headlights flickering or turning off. These resistors can be either plug and play or designed to be hardwired in, depending on the application and style. Please refer to the individual notes.   Product information updated on 2022-05-24